Loading... Please wait...

Categories

Our Newsletter













Accept Credit Cards

Hybrid Racing Shifter Cables for RSX and K Swap vehicles

List Price:
$349.99
Your Price:
$324.99 (You save $25.00)
SKU:
HRCAB02
Brand:
Shipping:
Free Shipping
Quantity:


Product Description

• Replaces OEM RSX shifter cables
• Solid rod ends (no rubber like OEM cables)
• Billet aluminum bushings
• Stainless steel cables and cable guides
• High heat, wire reinforced sleeve
• This is for a set of 2 cables.

Cables in action


HR Shifter Test take 1 from Hybrid Racing on Vimeo.

I ran the HR shift cables at the last time attack event down at Carolina Motorsports Park and it worked perfectly. The last two events saw me experience a couple throwaway laps simply because of deteriorating shifter engagement. Now it feels a MILLION times better. I can shift up and down with complete confidence. Before on the course, I had to be careful about shifting in mid-corner or under lateral loading due to the fact that I'd usually end up in neutral. Now that I can shift whenever I need to, I'm much faster in certain sections. -Striker08-13-09


This is for a set of 2 cables.

Hybrid Racing's Shifter Cables are designed to be a direct replacement for OEM RSX style shifter cables. 

These cables feature stainless steel push rods, swivel support tubes, and inner cables. The rod ends and mounting bushings are all 6061 aluminum that has received a T6 heat treatment and a black, hard anodized coating. 

Shown here are the ends of the Hybrid Racing shifter cables (note the all-stainless steel and aluminum construction as well as the chromed steel spherical joint)



These cables are designed to be upgraded replacements for the OEM cables. The solid rod ends and bushings give the Hybrid Racing cables a firmer, tighter feel over OEM RSX cables. In addition, the plastic swivel support tubes that are known to break on the OEM cables have been replaced with stainless steel swivel support tubes, which are significantly harder to break.

These cables are meant to give peace of mind to people who don't want to worry about their shifter cables breaking when they're shifting hard and fast during demanding racing applications. These cables are 30% thicker than the OEM RSX cables.

Are these cables a direct replacement for my OEM RSX style cables?

The Hybrid Racing shifter cables are slightly thicker than OEM cables and will fit a K Swap with little extra work. Some extra effort may be required to install these cables into an RSX as the rubber grommet that goes around the OEM cables will have to be retrofitted to accept the thicker Hybrid Racing cables. It should be noted that the OEM cable that is controlled by the right/left motion of the shifter has a plastic twist-lock bushing on the shifter end. Hybrid Racing cables instead use a spring clip and aluminum bushing. This aluminum bushing simplifies installation a bit, but more importantly, it gets rid of yet another plastic part that tends to flex on the OEM cables, leading to a sloppy feeling shift. The extra spring clip that you will need to install the Hybrid Racing cables is included with the cables, so you will not need to buy any other parts. An easy to follow installation tips sheet is included with each set of cables to make instillation as worry free as possible.

If you are using the Hybrid Racing cables on an OEM-style shifter mounted to a Karcepts adapter plate in a K swapped chassis, you will need to widen the hole for the cable that is controlled by the front/back motion of the shifter where it goes through the Karcepts adapter plate. The hole needs to be widened to approximately 3/4" diameter. A stepped drill bit works well for doing this.

What is included with these shifter cables?

Aside from 2 shifter cables, each shifter cable set includes 4 cotter pins, and a stainless steel shim and spacer. Each set also comes with an "m" bracket for affixing the shifter cables to the chassis in K swap applications. If you are mounting these into an RSX, this bracket will not be needed. Finally, each set of cables comes with an install tips sheet that shows how the cables should be mounted to the transmission and shifter.

RSX Shift Cable V1.2 Install Guide 

Currency Converter

Choose a currency below to display product prices in the selected currency.

United States Minor Outlying Islands Default Currency
European Union EUR

Add to Wish List

Click the button below to add the Hybrid Racing Shifter Cables for RSX and K Swap vehicles to your wish list.

You Recently Viewed...