Full-Race now offers a new and improved traction bar system for high power street, race, and road race cars. This ProAm style traction bar system utilizes a revolutionary design incorporating an additional motor mount. This motor mount prevents unwanted motor and transmission movement that is commonly seen on a high output vehicle. 

Engine vibrations will be increased somewhat with this type of motor mount. However, this mount can be easily removed in a few minutes with a basic set of hand tools. Simply install the mount when need be and remove it when it is not desired. 

Full-Race recommends using the traction bars to gently pull the LCA towards the front of the car, just 1 or 2 turns. This allows a slight increase in caster, even from Left to Right 
Applications available:

• '92-'00 Civic with Honda K Series motor
• '94-'01 Integra with Honda K Series motor

Application Notes:

• Mounts designed for engine swaps utilizing Hasport mounts.

This picture shows how the DC/EG/EK traction bar clevis MUST be mounted in line and level with the lower control arm.

DO NOT mount the clevis perpendicular to the control arm (like this) or any orientation other than in line and level with the lower control arm.