Loading... Please wait...

Categories

Our Newsletter













Accept Credit Cards

AEM Series 2 Plug & Play EMS Manual Transmission Mitsubishi

List Price:
€1,483.23
Your Price:
€1,008.60 (You save €474.63)
Brand:
Shipping:
Calculated at checkout
Quantity:


Product Description

AEM’s Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below. Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. Our new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition. 


Legal in California only for racing vehicles which may never be used upon a highway.

SERIES 2 KEY FEATURES 

 

 

Plugs directly into the factory harness. No rewiring necessary.
Uses all the factory sensors.
Includes start up calibrations.
System is fully enabled and unlocked - Never pay for upgrades!
Context sensitive help eases tuning process.
Maps can be password protected by the tuner to prevent unauthorized usage or sharing.
Runs on Windows-compatible software.
Up to 12 peak and hold injector drivers.
Up to 8 direct-fire coil outputs.
Up to 16 general-purpose outputs.
Up to 8 definable switch inputs.
Up to 4 EGT inputs with fuel trim.
1MB of internal data logging.
Electronic boost control.
Full idle control.
Programmable traction control.
Software definable knock control.
Two step launch control.
User configurable soft-cut rev limiters.
Wet or dry nitrous control.
Tune using new USB communication port or serial port.
Works with all AEM gauges.

 

Series 2 Vs. Original EMS

Click here for a comparison chart


AEMTUNER SOFTWARE FEATURES



Support Pane gives tuners context sensitive help and uses tuners’ actual calibrations to describe each function.
Maps can be password protected by the tuner to prevent unauthorized usage or sharing.
Internal conflict detection notifies tuner if obvious errors exist in assignment of inputs/outputs.
Compare Calibrations allows tuners to graphically compare tables and maps for easy analysis.
Workspaces are easily customizable and configurable.
Colored tables and maps.
Data analysis using AEMdata software. Click HERE for more info on AEMdata!

 

 

AEM's Series 2 EMS is a complete engine control system that plugs into the factory harness and uses the factory sensors. This means you do not need to replace any parts of the harness or sensors, just plug the EMS into the harness and begin tuning! The Series 2 EMS allows you to control every aspect of your engine. From VTEC to rev limit, timing, adding different sized injectors, boost control, nitrous injection, even anti-lag and individual cylinder fuel and timing trims, the Series 2 EMS gives you total control from an easy to use interface. 

Outputs
Injector Outputs 10 Saturated
Coil Outputs 4
Selectable direct drive or 0-5V Coil Output Yes
Direct plug in, no jumper harness required Yes
General purpose LS outputs 11
General purpose HS outputs 4
Individual cylinder ignition trims Yes
Individual cylinder fuel trims Yes
Inputs
Trigger inputs (Ref/Sync) 4
Analog voltage inputs 14
Configurable Analog/RTD/Thermister inputs 4
Switch inputs 5
Lambda inputs 2x
Knock sensors 2
User adjustable knock sensor center frequency Yes
Communication
USB comms Yes
RS232 comms Yes
Communication cables included Yes
Fully enabled editing/logging software included Yes
CAN bus equipped Yes
RS232 datastream output 19 ch
CAN datastream output 32 ch
Communicates with AIM Dash/Dataloggers Yes
Communicates with Racepak Dash/Dataloggers Yes
DATA Acquisition
Internal data logging 1 MB
Maximum internal logging rate (per channel) 250 Hz
PC logging Yes
Data analysis using AEMLog Yes
Functions and Features
All channels/maps/tuning options unlocked Yes
Boost control Yes
Groundspeed based boost target Yes
Staged injection Yes
Ground speed limiting Yes
Rate of Acceleration Control Yes
Overrun boost enhancement (anti-lag) Yes
Gear change ignition cut (shift-without-lift) Yes
Password protected calibrations Yes
Fuel & Ignition rev limiters Yes
"In cockpit" global fuel trim capability Yes
Gear dependent shift light Yes
Evap/Purge function Yes
DC Motor control 2 Ch
Software definable "virtual" switch inputs 2
EGT Based fuel trims Yes
Maximum boost limit None
Physical Dimensions
Length 192 mm
With 150 mm
Height 37 mm
Finish Black Anodized

 


AEM Series 2 Plug-N-Play Engine Management Systems
- Legal in California only for racing vehicles which may never be used upon a highway.

 

Find Similar Products by Category

Currency Converter

Choose a currency below to display product prices in the selected currency.

United States Minor Outlying Islands Default Currency
European Union EUR

Add to Wish List

Click the button below to add the AEM Series 2 Plug & Play EMS Manual Transmission Mitsubishi to your wish list.

You Recently Viewed...